Triumph TR6 1968-1976 LED Tail Lamp Board Sets
Make / Model: Triumph TR6 |
Brand: Classic Auto LEDs |
TR6 LED Tail Light Board Sets | TVR 2500M
1968-1976
Classic Auto LEDs, Manufactured In-House by BMC! We have the Only 10 Year Warranty in the business, and we have the Brightest Taillights.
Brightest is Not a Slogan. That's Not marketing scheme. It's Fact!
Classic Auto LEDs brand Lighting System for Your Tail Lamps:
We are the First and Oldest LED Light Source for British (and some other) tail lamp board inserts and have a Proven Track Record of the Best lights. We produce lights that we hope will last your lifetime. All lighting is built on boards SPECIFIC for each tail lamp design- No one size fits all! The lighting is built to face rearward towards the Red, Amber, or Clear lens and traffic- No Reflector to be reused, dropping light intensity as universal bulbs have. Using boards gives us three advantages: the light direction all faces rearward, the count of the bulbs (with intensity), and the total volume of taillight filled to create a Scale Effect. For those who ask for reduced cost, we could always face less bulbs per board, remove voltage stabilizing elements, or reduce to a one size fits-all, but that messes with the whole point- The Brightest and Large Spread Out Lighting IS SAFETY! Would you ask for seatbelts that cost half as much if it "only" cut the effectiveness by 25% ? Our goal is to be Seen, and make our Classics as Safe as we can offer.
Far Superior Lighting is Classic Auto LEDs End Result.
This Complete set includes an LED Bulb Count 240 LEDs in Complete sets of Four tail lamp boards. This product includes Lighting boards and hardware to install. Does not include lenses and original or replacement components for the vehicle. Any lens shown for identification purposes only.
Features of our Lighting Systems:
- Reverse voltage and over voltage protected.
- Current controlled to provide constant brightness over a wide range of voltage.
- The LEDs are rated for 10000 hours continuous use.
- The LED array uses 80% to 85% less current then the standard tail light bulb.
- The LED circuit boards plug directly into the existing wiring harness including the ground wire, not the socket- No light flickering that socket fit LED bulbs have.
- Most units do not require any modifications to the car other than removing the existing wires from the tail light housing and installing the new units. See the attached instructions for what installation requires per vehicle model.
- Choices in Ground Polarity Positive + or Negative -
- Lens Region/Type Available Both UK/Eurospec/World AND North American/USA
- Colours of our systems include Red and Amber, with some systems having white light when clear lenses are present.
BASIC VERSION: BASIC TWO RED BOARDS PART # 1-050
- BEHIND THE BRAKE BRKAE/PARK LENS IS THE PARK/BRAKE LEDS WITH 64 LEDS PER BOARD
- 128 LEDS PER SET FOR THE BASIC TWO BOARDS.
OUR FAVORITE: THE FOUR BRAKE LIGHT VERSION: AMBER TURN INDICATORS PLUS *DOUBLE BRAKE LIGHTS* PART # 1-042
- JUST LIKE THE BASIC, BEHIND THE BRAKE/PARK LENS IS THE RED PARK/BRAKE LEDS, HAVING 64 LEDS PER BOARD.
- BEHIND THE (OUTER) AMBER TURN INDICATOR LENS, THE CENTER PORTION IS AMBER TURN INDICATOR, AND THE OUTER PORTION LIGHTS UP IN RED! THE RED IN THE TURN LENS CAN BE USED FOR EITHER BRAKE, OR BRAKE/PARK COMBO. WE RECOMMEND BRAKE ONLY TO SIMULATE THE THIRD BRAKE LIGHT EFFECT. THESE BOARDS HAVE 64 LEDS PER BOARD.
- TOTAL OF 256 BULBS PER SET OF FOUR BOARDS.
TWO RED + TWO AMBER: FOUR BOARDS- TWO AMBER, TWO RED. LARGE TURN INDICATORS & BRAKE LIGHTS PART # 1-041
- JUST LIKE THE BASIC, BEHIND THE BRAKE/PARK LENS IS THE RED PARK/BRAKE LEDS, HAVING 64 LEDS PER BOARD.
- BEHIND THE (OUTER) AMBER TURN INDICATOR LENS, THE CENTER PORTION IS AMBER TURN INDICATOR, AND THE OUTER PORTION LIGHTS UP IN RED! THE RED IN THE TURN LENS CAN BE USED FOR EITHER BRAKE, OR BRAKE/PARK COMBO. WE RECOMMEND BRAKE ONLY TO SIMULATE THE THIRD BRAKE LIGHT EFFECT. THESE BOARDS HAVE 64 LEDS PER BOARD.
- TOTAL OF 256 BULBS PER SET OF FOUR BOARDS.
OUTER TWO DUAL USE BOARDS: AMBER/RED BOARDS PART # 1-044
- FITS BEHIND THE AMBER LENS, THIS GIVES A FAR BRIGHTER TURN SIGNAL THAN STOCK.
- FITTED WITH RED LIGHTS ON THE OUTER EDGES FOR FAR IMPROVED BRAKE LIGHTS FOR THE HARD TO SEE FLAT TR6 LIGHTS!
- 64 LEDS PER BOARD.
- 128 LEDS PER SET FOR THE BASIC TWO BOARDS.
BIG BAD TURN INDICATOR VERSION: LARGE AMBER (TURN SIGNAL ONLY) BOARDS PART # 1-043
- BEHIND THE AMBER TURN INDICATOR LENS FITS THE AMBER LEDS WITH 64 LEDS PER BOARD
- 128 LEDS PER SET FOR THE TWO OUTER BOARDS.
- WE OFFER THIS. IT WORKS EXCELLENT, BUT RECOMMEND THE AMBER/RED COMBINATION AS SHOWN ABOVE (1-041 OR 1-044) FOR ADDITIONAL BRAKE LIGHTING IF ALLOWED IN YOUR COUNTRY- AS BRAKE LAMPS ARE GENERALLY LARGER, AND TURN INDICATORS ARE GENERALLY SMALLER ON MODERN VEHICLES.