Triumph TR7/TR8 1974-1981 LED Tail Lamp Board Set
1975-1981 LED Board Sets
https://classicautoleds.com/assets/uploads/tr8-video-web.mp4
LED Rear Light Board Set for
Triumph TR7 | Triumph TR8
Classic Auto LEDs, Manufactured In-House by BMC! We have the Only 10 Year Warranty in the business, and we have the Brightest Taillights. Brightest is Not a Slogan. That's Not marketing scheme. It's Fact!
Classic Auto LEDs brand Lighting System for Your Tail Lamps:
We are the First and Oldest LED Light Source for British (and some other) tail lamp board inserts and have a Proven Track Record of the Best lights. We produce lights that we hope will last your lifetime. All lighting is built on boards SPECIFIC for each tail lamp design- No one size fits all! The lighting is built to face rearward towards the Red, Amber, or Clear lens and traffic- No Reflector to be reused, dropping light intensity as universal bulbs have. Using boards gives us three advantages: the light direction all faces rearward, the count of the bulbs (with intensity), and the total volume of taillight filled to create a Scale Effect. For those who ask for reduced cost, we could always face less bulbs per board, remove voltage stabilizing elements, or reduce to a one size fits-all, but that messes with the whole point- The Brightest and Large Spread Out Lighting IS SAFETY! Would you ask for seatbelts that cost half as much if it "only" cut the effectiveness by 25% ? Our goal is to be Seen, and make our Classics as Safe as we can offer.
Far Superior Lighting is Classic Auto LEDs End Result.
1-037 This set of Park/Brake Lights include an LED Bulb Count of 176 LEDs in the set of Four tail lamp boards.
1-038 This set of Park/Brake/Turn Lights include an LED Bulb Count of 264 LEDs in the set of Four tail lamp boards.
1-039 This Complete set of Park/Brake/Turn/Reverse Lights include an LED Bulb Count of 336 LEDs in the set of Four tail lamp boards.
This product includes Lighting boards and hardware to install. Does not include lenses and original or replacement components for the vehicle. Any lens shown for identification purposes only.
Features of our Lighting Systems:
- Reverse voltage and over voltage protected.
- Current controlled to provide constant brightness over a wide range of voltage.
- The LEDs are rated for 10000 hours continuous use.
- The LED array uses 80% to 85% less current then the standard tail light bulb.
- The LED circuit boards plug directly into the existing wiring harness including the ground wire, not the socket- No light flickering that socket fit LED bulbs have.
- Most units do not require any modifications to the car other than removing the existing wires from the tail light housing and installing the new units. See the attached instructions for what installation requires per vehicle model.
- Choices in Ground Polarity Positive + or Negative -
- Lens Region/Type Available Both UK/Eurospec/World AND North American/USA
- Colours of our systems include Red and Amber, with some systems having white light when clear lenses are present.
1-037 VERSION:
- BEHIND THE TOP LENS IS THE TWIN PARK/BRAKE BOARDS WITH 88 LEDS PER SIDE OF THE CAR. BOTH BOARDS CAN BE USED LIKE A 1157 BULB FOR PARKING AND BRAKE. WE HIGHLY RECOMMEND USING ONE BOARD PER SIDE FOR PARKING AND ALL FOUR BOARDS FOR BRAKE LIGHTS.
1-038 ADDS THE FOLLOWING:
- BEHIND THE TURN LENS IS 44 BULBS PER SIDE FOR TURN INDICATORS.
- JUST LIKE THE PARKING/BRAKE SECTION, THIS USES THE ENTIRE SECTION OF THE LIGHT GIVING A LARGER APPEARING LIGHT THAN A SIMPLE "BULB WITH A REFLECTOR" COULD EVER PROVIDE.
1-039 IS THE FULL KIT, WITH ALL OF THE ABOVE, PLUS:
- BEHIND EACH REVERSE LENS, WHITE LEDS COUNTING 36 LEDS PER SIDE GIVE A NEW SENSATION TO REVERSING.
- WHITE (CLEAR) LED LIGHTS OPERATE DIFFERENTLY THAN RED, AMBER, OR OTHERS AND ARE BRIGHTER, SO ALTHOUGH THERE ARE LESS, THEY WILL BE, AS ROLLS ROYCE STATED ABOUT THEIR POWER, “adequate.”
- WITH ALL LIGHTS ACTIVE, YOU CAN LIGHT UP A CIRCUS AND STILL HAVE LIGHT FOR THE PARKING LOT.
- TOTAL OF 336 BULBS PER 8 BOARD SET.
With the low power draw of your new LED turn signal lights, it often won't trigger the old bi-metal flasher properly. Please see our turn signal flashers for replacement units.